• 1A97 is industrial high purity aluminum, the standard is GB/T 3198-2003.

Chemical composition editor broadcast

Iron Fe: 0.015

Copper Cu: 0.003

Aluminum Al: 99.97

Note: Single: 0.005

Mechanical properties 

Tensile strength σ B/(MPa) : 40-100

Elongation (δ10/%) : ≥1

Note: Foil tensile test at room temperature

Sample size: thickness (0.010-0.024)

State: Foil tensile test at room temperature (0.010-0.024.O state)

Aluminum/Stainless steel clad plate

We can produce the following models for your choice 1000 Series：1A99,1A97,1A95,1A93,1A90,1A85,1080,1080A,1070,1070A,1370,1060,1050,1350,1145,1035,1A30,1100,1200,1235, 2000 Series：2A01,2A02,2A04,2A06,2A10,2A11,2B11,2A12,2B12,2A13,2A14,2A16,2B16,2A17,2A20,2A21,2A25,2A49,2A50, 2B50,2A70,2B70,2A80,2A90,2004,2011,2014,2014A,2214,2017,2017A,2117,2218,2618,2219,2024,2124 3000 Series：3A21,3003,3103,3004,3005,3105 4000 Series：4A01,4A11,4A13,4A17,4004,4032,4043,4043A,4047,4047A 5000 Series：5A01,5A02,5A03,5A05,5B05,5A06,5B06,5A12,5A13,5A30,5A33,5A41,5A43,5A66,5005,5019,5050,5251,5052, 5154,5154A, 5454,5554,5754,5056,5356,5456,5082,5182,5083,5086 6000 Series：6A02,6B02,6A51,6101,6101A,6005,6005A,6351,6060,6061,6063,6063A,6070,6181,6082 7000 Series：7A01,7A03,7A04,7A05,7A09,7A10,7A15,7A19,7A31,7A33,7A52,7003,7005,7020,7022,7050,7075,7475 8000 Series：8A06,8011,8090 Temper：O,H12,H13,H14,H16,H18,H24,H32,H34,H19,H38,G36,F,H111,H112,H192,H392,H393,H321 T1,T3,T4,T8,T72,T451,T42,T62,T5,T6,T36,T351,T651,T851,T3511,T913,T94,T7351,T89,T4510,T6510,T8510,T8511,T4511,T52,T5511,T6511,T54,T73 Product Introduction 5083 aluminum alloy is an aluminum-magnesium alloy which is a non-heat-treated aluminum alloy with an ultimate tensile strength of 18 to 51 ksi and has the highest strength in non-heat treated alloys. In addition, this alloy series is easy to weld and is used in a variety of applications such as ships, transportation, pressure vessels, bridges and buildings. Basic Information Model NO. 5083 Alloy Alloy Alloy No. 5083 Tempers O,H114,H24,H22,H112,T4,T6 Thickness 1.5-120 mm Certificate BV /Dnv /ABS/Lioyds Delivery Time 15-20 Days Trademark Signal Aluminum Transport Package Wooden Pallet Specification Pipe Origin China HS Code 76069100 Chemical Composition% No. Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Zr Others Al  Each Total 1 5005 0.300 0.700 0.200 0.200 0.50-1.1 0.100 — 0.250 — — 0.050 0.150 Remain 2 5050 0.400 0.700 0.200 0.100 1.1-1.8 0.100 — 0.250 — — 0.050 0.150 Remain 3 5251 0.400 0.500 0.150 0.1-0.5 1.7-2.4 0.150 — 0.150 0.150 — 0.050 0.150 Remain 4 5052 0.250 0.400 0.100 0.100 2.2-2.8 0.15-0.35 — 0.100 — — 0.050 0.150 Remain 5 5154 0.250 0.400 0.100 0.100 3.1-3.9 0.15-0.35 — 0.200 0.200 — 0.050 0.150 Remain 6 5056 0.300 0.400 0.100 0.05-0.20 4.5-5.6 0.05-0.20 — 0.100 — — 0.050 0.150 Remain 7 5356 0.250 0.400 0.100 0.05-0.20 4.5-5.5 0.05-0.20 — 0.100 0.06-0.20 — 0.050 0.150 Remain 8 5456 0.250 0.400 0.100 0.50-1.0 4.7-5.5 0.05-0.20 — 0.250 0.200 — 0.050 0.150 Remain 9 5082 0.200 0.350 0.150 0.150 4.0-5.0 0.150 — 0.250 0.100 — 0.050 0.150 Remain 10 5182 0.200 0.350 0.150 0.20-0.50 4.0-5.0 0.100 — 0.250 0.100 — 0.050 0.150 Remain

We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for 1a97 Aluminium Alloy Plate, High Quality Aluminium Circle , Embossed Aluminium Plates , 5005 H34 Aluminum Sheet , We have been in operation for more than 10 years. We are dedicated to quality products and consumer support. We invite you to visit our company for a personalized tour and advanced business guidance. Our solutions are broadly acknowledged and dependable by users and may meet consistently developing economic and social requires for 1a97 Aluminium Alloy Plate, Our staffs are rich in experience and trained strictly, with professional knowledge, with energy and always respect their customers as the No. 1, and promise to do their best to provide the effective and individual service for customers. The Company pays attention to maintaining and developing the long-term cooperation relationship with the customers. We promise, as your ideal partner, we will develop a bright future and enjoy the satisfying fruit together with you, with persisting zeal, endless energy and forward spirit.

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Stock view

   

2. Processing and Technology for heating processing

Cutting processing      Quenching              Tempering                  Annealing

       

3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch  

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute 

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.

   

2.Inspection Machining

     

   Metal composition testing machine                      Computerised Materials Torsion Testing Machine                Metal bar composite rod bending tensile strength testing machine

       3. Material test certificate

     4. Packaging 

    In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：

According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996  Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

 GB/T16471-1996Design and make the size limit of transport package 

5. Logistic

       

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

           2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

                  .      

          3. Our customers 

                 Customer visits 

           4. Past Inquiry

                  .     

   1.Customer Rating

       

FAQ
1. Q: Are you a manufacturer?  
 A:No, we are not manufacturers. We have our own warehouse and our own company. I believe we will be the most suitable supplier for you.  
2. Could we visit your factory?  
 A: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.  
3. Q: Do you have quality control system?  
 A: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.  
4. Q: Can you arrange the shipment for us?  
 A: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best  price with earliest vessel and professional service.
5. Q: How long is the delivery time?  
 A: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.  
6. Q: Can I get some samples?  
 A: We are glad to provide free samples to you, but we do not offer the freight.  
7. Q: What is your after-sale service?  
 A: We provide after-sale service and offer 100% guarantee on our products.  
8. Q: What is your MOQ?  
 A: 2 Tons  

Contact us