4A01 Aluminum Rod

Diameter: 5-800mm, or as customer’s requirements.
Length: 0-6000mm, or as requirement.


Material: 1050, 1060, 1070, 1080, 1100, 1235, 2011, 2014, 2017, 2024, 2A12, 2A16, 2A06, 3002, 3003, 3004, 3004, 3104, 3204, 3030, 3A21, 5005, 5025, 5040, 5052, 5056, 5083, 5086, 5182, 5754, 5A05, 6003, 6060, 6061, 6082, 6083, 6063, 6061, 7003, 8006, 8011, 8021, 8079.


Standard: JIS, AISI, ASTM, GB, DIN, EN, etc.


Stock: 4000 Ton/Month.


Quality control: Third Part Inspection is acceptable.


Delivery Time: Within 3 days for our stock size, 15-20days for our production.

About 4A01 Aluminium

It belongs to the series with high silicon content. Generally, the silicon content is between 4.5% and 6.0%. It belongs to building materials, mechanical parts, forging materials and welding materials; Low melting point, good corrosion resistance Product Description: 4000 series aluminum plate with heat resistance and wear resistance is representative of 4a01 4000 series aluminum plate, which belongs to the series with high silicon content. Generally, the silicon content is between 4.5% and 6.0%. It belongs to building materials, mechanical parts, forging materials and welding materials; Low melting point, good corrosion resistance Product Description: it has the characteristics of heat resistance and wear resistance. Aluminum alloy is a kind of non-ferrous metal structural materials widely used in industry. It has been widely used in automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum alloy welded structural parts is increasing, so the research on the weldability of aluminum alloy is also in-depth. The wide application of aluminum alloy has led to the development of aluminum alloy welding technology. At the same time, the development of welding technology has expanded the application field of aluminum alloy, so the welding technology of aluminum alloy is becoming one of the research hotspots.


Applications for 4A01

Aluminum silicon alloy is a kind of forging and casting alloy mainly composed of aluminum and silicon. It generally contains 11% silicon. At the same time, a small amount of copper, iron and nickel are added to improve the strength. The density is 2.6-2.7g/cm3. The thermal conductivity is 101-126 w / (m ·℃). Young's modulus is 71.0gpa. 5 J. The fatigue limit is ± 45MPa.

4A01 Chemical Composition

4A01 Chemical Composition
Al	Si	Cu	Mg	Zn	Mn	Ti	Ni	Fe+Ni
Margin	≤0.50	3.8～4.9	1.2～1.8	≤0.30	0.30～0.9	≤0.15	≤0.10	0～ 0.5

Mechanical Property

Mechanical Property
Aluminum	Grade	Normal	Temper	Tensile Strength	Yield Strength	Elongation%		Brinell Hardness
Alloy		Temper		N/mm	N/mm	Plate	Bar	HB
1XXX	1050	O,H112,H	O	78	34	40	-	20
	1060	O,H112,H	O	70	30	43	-	19
Al-Cu	2019	O,T3,T4,T6,T8	T851	450	350	10	-	-
(2XXX)	2024	O,T4	T4	470	325	20	17	120
Al-Mn	3003	O,H112,H	O	110	40	30	37	28
(3XXX)	3004	O,H112,H	O	180	70	20	22	45
Al-Si (4XXX)	4032	O,T6,T62	T6	380	315	-	9	120
Al-Mg	5052	O,H112,H	H34	260	215	10	12	68
(5XXX)	5083	O,H112,H	O	290	145	-	20	-
Al-Mg-Si	6061	O,T4,T6,T8	T6	310	275	12	15	95
(6XXX)	6063	O,T1,T5,T6,T8	T5	185	145	12	-	60
Al-Zn-Mg	7003	T5	T5	315	255	15	-	85
(7XXX)	7075	O,T6	T6	570	505	11	9	150

If you need product information or price, please fill in your contact information in the form, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Stock view

   

2. Processing and Technology for heating processing

Cutting processing      Quenching              Tempering                  Annealing

       

3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch  

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute 

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.

   

2.Inspection Machining

     

   Metal composition testing machine                      Computerised Materials Torsion Testing Machine                Metal bar composite rod bending tensile strength testing machine

       3. Material test certificate

     4. Packaging 

    In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：

According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996  Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

 GB/T16471-1996Design and make the size limit of transport package 

5. Logistic

       

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

           2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

                  .      

          3. Our customers 

                 Customer visits 

           4. Past Inquiry

                  .     

   1.Customer Rating

       

FAQ
1. Q: Are you a manufacturer?  
 A:No, we are not manufacturers. We have our own warehouse and our own company. I believe we will be the most suitable supplier for you.  
2. Could we visit your factory?  
 A: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.  
3. Q: Do you have quality control system?  
 A: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.  
4. Q: Can you arrange the shipment for us?  
 A: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best  price with earliest vessel and professional service.
5. Q: How long is the delivery time?  
 A: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.  
6. Q: Can I get some samples?  
 A: We are glad to provide free samples to you, but we do not offer the freight.  
7. Q: What is your after-sale service?  
 A: We provide after-sale service and offer 100% guarantee on our products.  
8. Q: What is your MOQ?  
 A: 2 Tons  

Contact us