CuSn6 is a phosphor tin bronze with high strength. Elasticity. Wear resistance and diamagnetization, good pressure workability in hot and cold states, high fire resistance to electric spark, welding and fiber welding, good machinability, corrosion resistance in atmosphere and fresh water.

Material Test Certificate

General

Property	Temperature	Value
Density	23.0 °C	8.82 g/cm³

Mechanical

Property	Temperature	Value
Elastic modulus	23.0 °C	118 GPa
Tensile strength	23.0 °C	385 MPa
Yield strength	23.0 °C	235 MPa

Thermal

Property	Temperature	Value
Coefficient of thermal expansion	23.0 °C	1.8E-5 1/K
Specific heat capacity	23.0 °C	377 J/(kg·K)
Thermal conductivity	23.0 °C	75 W/(m·K)

Corrosion Resistance Typical uses This leaflet is for general information only and is not subject to revision. No claims can be derived from it unless there is evidence of intent or gross negligence. The data given are no warranty that the product is of a specified quality and they cannot‎replace‎expert‎advice‎or‎the‎customer’s‎own‎test. Bronce is resistant to: Natural and industrial atmospheres as well as maritime air, drinking and service water (if the flow rate is not excessive), seawater, non oxidizing acids, alkaline solutions and neutral saline solutions. Bronce is not resistant to: Ammonia, halogenide, cyanide and hydrogen sulfide solutions and atmospheres, oxidizing acids. Bronce alloys have an improved resistivity towards seawater and pitting corrosion. Automotive, components of electrical engineering, connectors, relays and conductor springs, retaining clamps, springs, metal hose, bushings, paper-, textile- and chemical indsutry as well as mechanical and apparatus engineering and shipbuilding 

 If you need product information or price, please fill in your contact information in the form, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Stock view

Item	Free-Cutting brass bar C36000 for screw machines ASTM B16 Brass bar,brass rod,brass shaft,brass stick, high quality brass bar brass rod price, Brass Rod/Brass Bar,Brass round bar
Standard	JIS3250-2006,EN12163-98,GB/T4423-2007,ASTM B150M-03,ASTM B98M-03, ASTM B151M-05,ASTM B453,ASTM B121,ASTM B124,ASTM B21,etc
Material	H62,H59,H70,H80,H90,C21000,C22000,C22600,C23000,C24000,C26000,C26130,C26800, C27000,C27200,C27400,C28000,C31600,C32000,C34000,C34500,C35000,C35600,C36000, C36500,C40500,C40800,C40850,C40860,C41100,C41500,C42200,C42500,C43000, C43400,C44500,C46400,C46500,C51000,C52100,C53400,C61300,C61400,C63000,C63800, C65100,C65500,C68800,C70250,C70600,C70620,C71500,C71520,C72200,C72500,C73500, C74000,C74500,C75200,C76200,C77000,etc
Diameter	1-800mm
Length	1-12m,or as required
Hardness	O,1/2H,3/4H,H,EH,SH,etc
Surface	mill,polished,mirror,brush,hair line,sand blast,antique,etc
Price term	Ex-Work,FOB,CNF,CFR,CIF,FCA,DDP,DDU,etc
Payment term	TT,L/C,Western Union
MOQ	100Kg
Export to	Ireland,Singapore,Indonesia,Ukraine,Saudi Arabia,Spain,Canada,USA,Brazil,Thailand, Nigeria,Korea, ,India,Egypt,Peru,Oman,Dubai,Kuwait,Malaysia,Viet Nam,England, Italy,etc
Package	Standard export package,suit for all kinds of transport,or as required.
Container Size	20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High)
Application	Brass bar can be made as all kinds of deep drawing and bending stress components,such as pin,rivets, washers,nuts,ducts,air gauge,screen mesh,radiator parts,etc.Has a good mechanical performance,under the hot plasticity is good,the plastic fair,under the cold can good machinability, fine welding and welding,corrosion resistance,is widely used an ordinary brass
Contact	If you have any question ,please feel free to contact me We are sure your inquiry or requirements will get prompt attention.

2. Processing and Technology for heating processing

Cutting processing      Quenching              Tempering                  Annealing

       

3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch  

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute 

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.

   

2.Inspection Machining

     

   Metal composition testing machine                      Computerised Materials Torsion Testing Machine                Metal bar composite rod bending tensile strength testing machine

       3. Material test certificate

     4. Packaging 

    In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：

              

According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

 

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996  Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

 GB/T16471-1996Design and make the size limit of transport package 

5. Logistic

       

               By SEA                                                     By Air                                                           By Express

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

           2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

                  .      

          3. Our customers 

                 Customer visits 

           4. Past Inquiry

                  .     

   1.Customer Rating

       

FAQ
1. Q: Are you a manufacturer?  
 A:No, we are not manufacturers. We have our own warehouse and our own company. I believe we will be the most suitable supplier for you.  
2. Could we visit your factory?  
 A: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.  
3. Q: Do you have quality control system?  
 A: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.  
4. Q: Can you arrange the shipment for us?  
 A: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best  price with earliest vessel and professional service.
5. Q: How long is the delivery time?  
 A: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.  
6. Q: Can I get some samples?  
 A: We are glad to provide free samples to you, but we do not offer the freight.  
7. Q: What is your after-sale service?  
 A: We provide after-sale service and offer 100% guarantee on our products.  
8. Q: What is your MOQ?  
 A: 2 Tons  

Contact us