DIN EN 1.4541 Stainless Steel (X6CrNiTi18-10 Material)

DIN EN 1.4541 stainless steel (X6CrNiTi18-10) is a variant version of 1.4301. The addition of titanium stabilizes carbides without sensitization, because titanium forms more stable carbides than chromium. These carbides remove carbon from the solid solution and prevent the precipitation of chromium carbide. Therefore, this material is also called stabilized stainless steel. 1.4541 material has high corrosion resistance, good weldability and cold formability.

Datasheet & Specification

The following tables and lists give the stainless steel 1.4541 datasheet and specification including chemical composition, physical properties and mechanical properties, heat treatment, welding, etc.

Chemical Composition

DIN EN 1.4541 material chemical composition is listed in the following table based on cast analysis.

			Chemical Composition, %
Country (Region)	Standard	Steel Grade (Steel Number)	C, ≤	Si, ≤	Mn, ≤	P, ≤	S, ≤	Cr	Ni	Ti
European Union	EN 10088-2; EN 10088-3	X6CrNiTi18-10 (1.4541)	0,08	1,00	2,00	0,045	0,015	17,0-19,0	9,0-12,0	5xC to 0,70

Physical Properties

DIN 1.4541 stainless steel physical properties are given in the following lists, including density, thermal expansion, elastic modulus, thermal conductivity, specific heat capacity and electrical resistance.

Notes:

• 10-6·K-1 = 10-6/K
• 1 Ω·mm²/m = 1 μΩ·m
• 1 g/cm3 = 1 kg/dm3 = 1000 kg/m3
• 1 GPa = 1 kN/mm2
• 1 MPa = 1 N/mm2

Steel AISI 321 / EN 1.4541 / 08KH18N10T

Corrosion resistant steel AISI 321 contains in its composition chromium and Nickel additives and titanium. Refers to the type of psacalium austenitic alloys are non-magnetic species. Domestic analogue GOST - 08kh18n10t. Features Heat-resistant steel is annealed at temperatures up to 1200 °C. After annealing requires rapid cooling (water, oil). Procedure otoczenia are in the range from 450 to 800 °C, it is necessary to monitor the appearance of the first signs microleasing corrosion processes. Forging starts at a maximum temperature of 1200 °C and ends at 940 °C. it is necessary to follow a gradual temperature decrease (not sharp) to ensure a uniform carbon distribution in the mass of the ingot. AISI 321 steel, the price of which in our company is very affordable. Its weldability is somewhat worse than that of counterparts, due to the presence in the composition of the titanium alloy. Use This alloy is highly demanded in the industry because it produces elements of welded equipment, heat exchangers, chimneys, electrode automotive spark plugs. In addition, steel demand in such industries as: • chemical industry; • food and medical industry; • Aeronautics; • automotive; • shipbuilding and so on. To buy steel at the most affordable cost in our catalog.

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Stock view

   

2. Processing and Technology for heating processing

Cutting processing      Quenching              Tempering                  Annealing

       

3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch  

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute 

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.

   

2.Inspection Machining

     

   Metal composition testing machine                      Computerised Materials Torsion Testing Machine                Metal bar composite rod bending tensile strength testing machine

       3. Material test certificate

     4. Packaging 

    In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：

According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996  Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

 GB/T16471-1996Design and make the size limit of transport package 

5. Logistic

       

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

           2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

                  .      

          3. Our customers 

                 Customer visits 

           4. Past Inquiry

                  .     

   1.Customer Rating

       

FAQ
1. Q: Are you a manufacturer?  
 A:No, we are not manufacturers. We have our own warehouse and our own company. I believe we will be the most suitable supplier for you.  
2. Could we visit your factory?  
 A: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.  
3. Q: Do you have quality control system?  
 A: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.  
4. Q: Can you arrange the shipment for us?  
 A: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best  price with earliest vessel and professional service.
5. Q: How long is the delivery time?  
 A: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.  
6. Q: Can I get some samples?  
 A: We are glad to provide free samples to you, but we do not offer the freight.  
7. Q: What is your after-sale service?  
 A: We provide after-sale service and offer 100% guarantee on our products.  
8. Q: What is your MOQ?  
 A: 2 Tons  

Contact us