1070-Luoyue Precision Metal

1070 is a pure aluminium alloy. It is a wrought alloy with a high corrosion resistance and an excellent brazing ability.

1070 Aluminium alloy has aluminium, iron, silicon, zinc, vanadium, copper, titanium, magnesium, and manganese as minor elements.

1070 aluminum is a 1000-series aluminum alloy: it is considered commercially pure, and is formulated for primary forming into wrought products. 1070 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-1070. Additionally, the EN chemical designation is Al99,7. And the UNS number is A91070.

It originally received its standard designation in 1954.

The properties of 1070 aluminum include nine common variations. This page shows summary ranges across all of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare 1070 aluminum to: 1000-series alloys (top), all aluminum alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on

Temper：O,H12,H13,H14,H16,H18,H24,H32,H34,H19,H38,G36,F,H111,H112,H192,H392,H393,H321
T1,T3,T4,T8,T72,T451,T42,T62,T5,T6,T36,T351,T651,T851,T3511,T913,T94,T7351,T89,T4510,T6510,T8510,T8511,T4511,T52,T5511,T6511,T54,T73

Chemical Composition

The following table shows the chemical composition of aluminium/aluminum 1070 alloy.

Element Content (%)

Aluminum, Al ≥ 99.7

Iron, Fe ≤ 0.25

Silicon, Si ≤ 0.20

Zinc, Zn ≤ 0.040

Vanadium, V ≤ 0.050

Copper, Cu ≤ 0.040

Titanium, Ti ≤ 0.030

Magnesium, Mg ≤ 0.030

Manganese, Mn ≤ 0.030

Other (each) ≤ 0.030

Physical Properties

The physical properties of aluminium/aluminum 1070 alloy are outlined in the following table.

Properties Metric Imperial

Density 2.70 g/cm3 0.0975 lb/in3

Mechanical Properties

The mechanical properties of aluminium / aluminum 1070-O alloy are tabulated below.

Properties Metric Imperial

Tensile strength 95 MPa 13778 psi

Applications

Aluminium / aluminum 1070 alloy is chiefly used in the following areas:

General industrial components

Building and construction

Transport

Electrical material

PS plates

Strips for ornaments

Communication cables

Refrigerator and freezer cabinets

For joining two pieces of aluminium / aluminum.

Element	Content (%)
Aluminum, Al	≥ 99.7
Iron, Fe	≤ 0.25
Silicon, Si	≤ 0.20
Zinc, Zn	≤ 0.040
Vanadium, V	≤ 0.050
Copper, Cu	≤ 0.040
Titanium, Ti	≤ 0.030
Magnesium, Mg	≤ 0.030
Manganese, Mn	≤ 0.030
Other (each)	≤ 0.030

Properties	Metric	Imperial
Density	2.70 g/cm3	0.0975 lb/in3

Properties	Metric	Imperial
Tensile strength	95 MPa	13778 psi

1. Stock view

2. Processing and Technology for heating processing

Cutting processing   Quenching   Tempering Annealing



3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.

2.Inspection Machining

Metal composition testing machine Computerised Materials Torsion Testing Machine Metal bar composite rod bending tensile strength testing machine

3. Material test certificate

4. Packaging

In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：

According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996 Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

GB/T16471-1996Design and make the size limit of transport package

5. Logistic

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

.

3. Our customers

Customer visits

4. Past Inquiry

.

1.Customer Rating

FAQ
1. Q: Are you a manufacturer?
A:No, we are not manufacturers. We have our own warehouse and our own company. I believe we will be the most suitable supplier for you.
2. Could we visit your factory?
A: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.
3. Q: Do you have quality control system?
A: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.
4. Q: Can you arrange the shipment for us?
A: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best price with earliest vessel and professional service.
5. Q: How long is the delivery time?
A: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.
6. Q: Can I get some samples?
A: We are glad to provide free samples to you, but we do not offer the freight.
7. Q: What is your after-sale service?
A: We provide after-sale service and offer 100% guarantee on our products.
8. Q: What is your MOQ?
A: 2 Tons

Contact us