Chemical Composition

	Elements
	Cu(1)	Pb	Zn	Fe
(1) Cu + Sum of Named Elements 99.8% min.
Min (%)	84.0
Max (%)	86.0	0.05	Rem	0.05

Mechanical Properties *

Form	Temper	Temper Code	Tensile Strength (ksi)	YS-0.5% Ext (ksi)	Elongation (%)	Rockwell B scale	Rockwell F scale	Rockwell 30T scale	Shear Strength (ksi)	Torsion Modulus (ksi)	Fatigue Strength** (ksi)	Section Size (in)	Cold Work (%)
* Measured at room temperature, 68°F (20°C).** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106.
Flat Products	1/2 Hard	H02	57 Typ		12 Typ	65 Typ		60 Typ	37 Typ			0.04
	1/4 Hard	H01	49 Typ			45 Typ		48 Typ
	1/8 Hard	H00	43 Typ	16 Typ	44 Typ		66 Typ	28 Typ	32 Typ			0.04
	As Hot Rolled	M20	42 Typ
	Extra Hard	H06	78 Typ	61 Typ	4 Typ	83 Typ		72 Typ	44 Typ			0.04
	Hard	H04	70 Typ	57 Typ	5 Typ	77 Typ		68 Typ	42 Typ	6.4 Typ	20 Typ	0.04
	Nominal Grain Size 0.015 mm	OS015	45 Typ	18 Typ	42 Typ		71 Typ	38 Typ	33 Typ			0.04
	Nominal Grain Size 0.025 mm	OS025	43 Typ	16 Typ	44 Typ		66 Typ	28 Typ	32 Typ			0.04
	Nominal Grain Size 0.035 mm	OS035	41 Typ	14 Typ	46 Typ		63 Typ	22 Typ	31 Typ			0.04
	Nominal Grain Size 0.050 mm	OS050	40 Typ	12 Typ	47 Typ		59 Typ	14 Typ	31 Typ			0.04
	Nominal Grain Size 0.070 mm	OS070	39 Typ	10 Typ	48 Typ		56 Typ	10 Typ	31 Typ			0.04
	Spring	H08	84 Typ	63 Typ	3 Typ	86 Typ		74 Typ	46 Typ			0.04
Pipe	Nominal Grain Size 0.015 mm	OS015	44 Typ		45 Typ		71 Typ
Tube	Hard Drawn	H80	70 Typ		8 Typ	77 Typ		68 Typ				0.065	35
	Light Drawn, Light Cold Rolled	H55	50 Typ	40 Typ	30 Typ	55 Typ		54 Typ				0.065	15
	Nominal Grain Size 0.015 mm	OS015	44 Typ	18 Typ	45 Typ		71 Typ	38 Typ				0.065
	Nominal Grain Size 0.050 mm	OS050	40 Typ	12 Typ	55 Typ		60 Typ	15 Typ				0.065
Wire	1/2 Hard	H02	72 Typ		8 Typ				43 Typ			0.08
	1/4 Hard	H01	59 Typ		11 Typ				38 Typ			0.08
	1/8 Hard	H00	50 Typ		25 Typ				35 Typ		20 Typ	0.08
	Hard	H04	88 Typ		6 Typ				48 Typ			0.08
	Nominal Grain Size 0.015 mm	OS015	45 Typ						33 Typ			0.08
	Nominal Grain Size 0.025 mm	OS025	43 Typ						32 Typ			0.08
	Nominal Grain Size 0.035 mm	OS035	41 Typ		48 Typ				31 Typ			0.08
	Spring	H08	105 Typ						54 Typ			0.08

Physical Properties

Melting Point - Liquidus°F	1880
Melting Point - Solidus°F	1810
Densitylb/cu in. at 68°F	0.316
Specific Gravity	8.75
Electrical Conductivity% IACS at 68°F	37
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F	92
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F)	10.4
Specific Heat CapacityBtu/ lb /°F at 68°F	0.09
Modulus of Elasticity in Tensionksi	17000
Modulus of Rigidityksi	6400

Fabrication Properties

Technique	Suitability
Soldering	Excellent
Brazing	Excellent
Oxyacetylene Welding	Good
Gas Shielded Arc Welding	Good
Coated Metal Arc Welding	Not Recommended
Spot Weld	Fair
Seam Weld	Not Recommended
Butt Weld	Good
Capacity for Being Cold Worked	Excellent
Capacity for Being Hot Formed	Good
Machinability Rating	30

If you need product information or price, please fill in your contact information in the form, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Stock view

   

2. Processing and Technology for heating processing

Cutting processing      Quenching              Tempering                  Annealing

       

3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch  

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute 

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.

   

2.Inspection Machining

     

   Metal composition testing machine                      Computerised Materials Torsion Testing Machine                Metal bar composite rod bending tensile strength testing machine

       3. Material test certificate

     4. Packaging 

    In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：

According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996  Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

 GB/T16471-1996Design and make the size limit of transport package 

5. Logistic

       

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

           2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

                  .      

          3. Our customers 

                 Customer visits 

           4. Past Inquiry

                  .     

   1.Customer Rating

       

FAQ
1. Q: Are you a manufacturer?  
 A:No, we are not manufacturers. We have our own warehouse and our own company. I believe we will be the most suitable supplier for you.  
2. Could we visit your factory?  
 A: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.  
3. Q: Do you have quality control system?  
 A: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.  
4. Q: Can you arrange the shipment for us?  
 A: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best  price with earliest vessel and professional service.
5. Q: How long is the delivery time?  
 A: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.  
6. Q: Can I get some samples?  
 A: We are glad to provide free samples to you, but we do not offer the freight.  
7. Q: What is your after-sale service?  
 A: We provide after-sale service and offer 100% guarantee on our products.  
8. Q: What is your MOQ?  
 A: 2 Tons  

Contact us