MANUFACTURING APPLICATIONS OF INCONEL 617
lnconel® 617 is used in:

gas turbines for combustion cans
ducting
transition liners
petrochemical processing
heat-treating equipment
nitric acid production
components of power-generating plants
Oil Power Plants
Nuclear Power Plants

DESCRIPTION
lnconel® 617 is a nickel-chromium-cobalt-molybdenum alloy with an exceptional combination of metallurgical stability, strength, and oxidation resistance at high temperatures. Resistance to oxidation is enhanced by an aluminum addition. The alloy also resists a wide range of corrosive aqueous environments. Used in gas turbines for combustion cans, ducting, and transition liners; for petrochemical processing; for heat-treating equipment; and in nitric acid production. Standard product forms are round, forging stock, extruded section, plate, sheet, strip, pipe, tube, and wire.


CHEMISTRY TYPICAL
Nickel: 44.5 min
Chromium: 20.0-24.0
Cobalt: 10.0-15.0
Molybdenum: 8.0-10.0
Aluminum: 0.8-1.5
Carbon: 0.05-0.15
Iron: 3.0 max
Manganese: 1.0 max
Silicon:m1 .0 max
Sulfur: 0.015 max
Titanium: 0.6 max
Copper: 0.5 max
Boron: 0.006 max


PHYSICAL PROPERTIES OF INCONEL 617
Density: 0.302 lb/in3, 8.36 g/cm3


Electrical Resistivity: ohm-cir-mil/ft (micro-ohm-m):
At 78 ° F (20 ° C): 736 (1.222)
At 200 ° F (100 ° C): 448 (1.245)
At 400 ° F (200 ° C): 757 (1.258)
At 600 ° F (300 ° C): 764 (1.268)
At 800 ° F (400 ° C): 770 (1.278)
At 1000 ° F (500 ° C): 779 (1.290)
At 1200 ° F (600 ° C): 793 (1.308)
At 1400 ° F (700 ° C): 807 (1.332)
At 1600 ° F (800 ° C): 803 (1.342)
At 1800 ° F (900 ° C): 824 (1.338)
At 2000 ° F (1000 °C): - (1.378)


Specific Heat: BTU/lb-° F (J/Kg-° C):
At 78 ° F (20 ° C): 0.100 (419)


Thermal Conductivity: BTU-in/hr-tt2-° F (W/m•° C):
At 78 ° F (20 ° C): 94 ( 13.4) At 200 ° F (100 ° C): 101 (14.7)
At 400 ° F (200 ° C): 113 (16.3)
At 600 ° F (300 ° C): 125 (17.7)
At 800 ° F (400 ° C): 137 (19.3)
At 1000 ° F (500 ° C): 149 (20.9)
At 1200 ° F (600 ° C): 161 (22.5)
At 1400 ° F (700 ° C): 173 (23.9)
At 1600 ° F (800 ° C): 185 (25.5)
At 1800 ° F (900 ° C): 197 (27.1)
At 2000 ° F (1000 °C): 209 (28.7)


Mean Coefficient of Thermal Expansion: µin/in-° F(µm/m-° C):
78 - 200 ° F (20 - 100 ° C): 7.0 (11.6)
78 - 400 ° F (20 - 200 ° C): 7.2 (12.6)
78 - 600 ° F (20 - 300 ° C): 7.49 (13.1)
78 - 800 ° F (20 - 400 ° C): 7.6 (13.6)
78 - 1000 ° F (20 - 500 ° C: 7.7 (13.9)
78 - 1200 ° F (20 - 600 ° C): 8.0 (14.0)
78 - 1400 ° F (20 - 700 ° C): 8.4 (14.8)
78 - 1600 ° F (20 - 800 ° C): 8.7 (15.4)
78 - 1800 ° F (20 - 900 ° C): 9.0 (15.8)
78 - 2000 ° F (20 - 1000 °C): 9.2 (16.3)


Modulus of Elasticity: KSI (MPa):
30.6 x 103 (211 x 103) in tension


Melting Range: 2430 - 2510 ° F (1332 - 1380 ° C)


FORMS
Coil - Sheet, Strip, Foil Wire - Profile, Round, Flat, Square

Chemical Composition of Nickel Alloy 617 and Inconel® 617 in

Al

.8 - 1.5

B

.006 max

C

.05 - .15

Co

10 - 15

Cr

20 - 24

Fe

3.0 max

Mn

1.0 max

Mo

8 - 10

Ni

44.5 max

S

.015 max

Si

1.0 max

Ti

0.6 max

---

Nickel Alloy 617 and Inconel® 617 in Standards

Rod, Bar, Wire, and Forging Stock

ASTM B 166/ASME SB 166
ASTM B 564/ASME SB 564
SAE AMS 5887
VdTÜV 485
ISO 9724
DIN 17752
DIN 17753
DIN 17754

Plate, Sheet, and Strip

ASTM B 168/ASME SB 168
SAE AMS 5888
SAE AMS 5889
VdTÜV 485
ISO 6208
DIN 17750

Pipe & Tubing

VdTÜV 485
ISO 6207
ASTM B 546/ASME SB 546
DIN 17751

Welding

Inconel 617™ is welded using gas-tungsten arc welding, shielded metal-arc welding, gas metal-arc welding, and submerged-arc welding methods.

Heat Treatment

Inconel 617™ is heat treated by annealing at 1177°C (2150°F) followed by quenching in water or cooling in air for thinner sections.

Forging

Inconel 617™ is forged at 1010 to 1205°C (1850 to 2200°F).

Hot Working

Inconel 617™ is hot worked at 927 to 1205°C (1700 to 2200°F).

Cold Working

Inconel 617™ can be cold worked using standard tooling.

Annealing

Inconel 617™ is annealed at 1177°C (2150°F) followed by cooling.

Hardening

Inconel 617™ can be hardened by cold working.

Applications

Inconel 617™ is used in industrial furnace components and gas turbines for combustion cans and ducts.

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Stock view

   

2. Processing and Technology for heating processing

Cutting processing      Quenching              Tempering                  Annealing

       

3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch  

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute 

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.

   

2.Inspection Machining

     

   Metal composition testing machine                      Computerised Materials Torsion Testing Machine                Metal bar composite rod bending tensile strength testing machine

       3. Material test certificate

     4. Packaging 

    In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：

According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996  Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

 GB/T16471-1996Design and make the size limit of transport package 

5. Logistic

       

               By SEA                                                     By Air                                                           By Express

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

           2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

                  .      

          3. Our customers 

                 Customer visits 

           4. Past Inquiry

                  .     

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

Customer Feedback:

           Comments

           HOT FAQ:

Q1. Where is your factory ?

A1: Our company’s processing center is located in Shanghai, China.Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.We can provide a wide range of personalized services according to the customers’ needs.

Q2. What are your company's main products ?

A2: We are professional one-stop meta supplier for Aluminium/ steel/ stainless steel/ copper etc.  

Q3. How do you control quality ?

A3: Mill Test Certification is supplied with shipment, Third Party Inspection is available.

Q4. What are the advantages of your company ?

A4: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.

Q5. How many coutries you already exported ?

A5: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt,Turkey, Jordan, India, etc. We are based in Shanghai, China, start from 2019,sell to Southeast Asia(50.00%),South America(10.00%),North America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),Northern Europe(5.00%),Domestic Market(15.00%),Mid East(10.00%). There are total about 11-50 people in our office.

Q6. Can you provide sample ?

A6: Small samples in store and can provide the samples for free.

Customized samples will take about 5-7days.

Q7Could we visit your factory?  

A7: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.  

Q8: Do you have quality control system?  

A8: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.  

Q9: Can you arrange the shipment for us?  

A9: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best  price with earliest vessel and professional service.

Q10: How long is the delivery time?  

A10: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.  

Q11: Can I get some samples?  

A11: We are glad to provide free samples to you, but we do not offer the freight.  

Q12: What is your after-sale service?  

A12: We provide after-sale service and offer 100% guarantee on our products.  

Q13: What is your MOQ?  

A13: Depend on the request material, sometimes for customized one have MOQ.

Q14: why should you buy from us not from other suppliers?

Luoyue precision metals (Shanghai) Co., Ltd. is located in Shanghai, China. It is one of the most professional metal material suppliers in China, providing nearly 100 kinds of metal materials, from raw materials to CNC processing

Q15: what services can we provide?

Accepted Delivery Terms: FOB, CFR, CIF, EXW, CIP, DDP, Express Delivery

Accepted Payment Currency:USD,EUR,JPY,CAD,GBP,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A

Language Spoken:English,Chinese,Spanish

Supply Ability

500 Ton/Tons per Month

Packaging & Delivery

Airworthy package. Waterproof cloth, wooden case, craft paper and steel belt packing.

Port: shanghai

Exhibition

Production Workshop

Package & Shipping

Contact us