Inconel Alloys

         American Special Metals, Corp. distribution products includes super alloys in Pipe, Tube, Fitting, Flange, Sheet, Strip, Plate, Round Bar, Flat Bar, Fastener, Forging Stock, Hexagon and Wire.

American Special Metals' core business is the Distribution of nickel alloys and cobalt alloys. 

The Inconel® Alloys are highly engineered to offer a superior combination of heat resistance, high temperature corrosion resistance, toughness and strength for the most demanding applications. 

Information on the physical and mechanical properties of these products, the most comprehensive range of alloy compositions and product forms available from a single Distributor, can be accessed below. 

INCONEL® nickel-chromium alloy 625 (UNS N06625/W.Nr. 2.4856) is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C). 

Strength of INCONEL® alloy 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix; thus precipitation-hardening treatments are not required. This combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high-temperature effects such as oxidation and carburization.

Available Product Forms: 

Pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon, wire and extruded.

Inconel® Incoloy® Monel® are Registered Trademarks of Special Metals Corporation and Its subsidiaries.

Specifications

INCONEL® alloy 625 is designated as UNS N06625, Werkstoff Number 2.4856 and ISO NW6625 and is listed in NACE MR-01- 75. 

• Rod, Bar, Wire and Forging Stock:  ASTM B 446; ASME SB 446 (Rod & Bar), ASTM B 564; ASME SB 564 (Forgings);  AMS 5666 (Bar, Forgings, & Rings); AMS 5837 (Wire), ISO 9723 (Rod & Bar), ISO 9724 (Wire), ISO 9725 (Forgings), VdTÜV 499 (Rod & Bar), BS 3076NA21 (Rod & Bar), EN 10095 (Rod, Bar, & Sections), DIN 17752 (Rod & Bar), ASME Code Case 1935 (Rod, Bar, & Forgings), DIN 17754 (forgings), DIN 17753 (Wire).
• 
  
• 
  
• Plate, Sheet and Strip: - ASTM B 443; ASTM SB 443 (Plate, Sheet & Strip), AMS 5599; 5869; MAM 5599 (Plate, Sheet & Strip), ISO 6208 (Plate, Sheet & Strip), VdTÜV 499 (Plate, Sheet & Strip), BS 3072NA21 (Plate & Sheet), EN 10095 (Plate, Sheet & Strip), DIN 17750 (Plate, Sheet & Strip), ASME Code Case 1935.
• 
  
• 
  
• Pipe & Tube: ASTM B 444; ASTM B 829; ASME SB444; ASME SB 829 (Seamless Pipe & Tube), ASTM B704; ASTM B 751; ASME SB 704; ASME SB 751 (Welded Tube), ASTM B705; ASTM B 775; ASME SB 705; ASME SB 775 (Welded Pipe), ISO 6207 (Tube), AMS 5581 (Seamless & Welded Tube), VdTÜV 499 (Tube), BS 3074NA21 (Seamless Pipe & Tube), DIN 17751 (Tube), ASME Code Case 1935.
• 
  
• 
  
• Other Product Forms: ASTM B 366; ASME SB 366 (Fittings), ISO 4955A (Heat Resisting Steels & Alloys), DIN 17744 (Chemical composition of all product forms).
• 
  
• 
  
• Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. American Special Metals, Corp. is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.
• 
  
• 
  
• Inconel®  625 is a Registered Trademark of Special Metals Corporation and Its subsidiaries.
• 
  
• 
  
• American Special Metals, Corp. makes all reasonable efforts to ensure the accuracy and correctness of the data in this document but makes no representations or warranties as to the data’s accuracy, correctness or reliability. All data are for general information only and not for providing design advice. It is the responsibility of the user to test specific alloys under actual service conditions to determine their suitability for a particular purpose.

Chemistry

Chemical Requirements
	Ni	Fe	Cr	Si	Mo	Mn	C
Max		5.0	23.0	0.50	10.0	0.50	0.10
Min	58.0		20.0		8.0

Tensile Data

Mechanical Property Requirements
	Ultimate Tensile	Yield Strength (0.2% OS)	Elong. in 2 in. or 50mm or 4D, min., %	R/A	Hardness
Cold Worked/Annealed
Min	120 KSI	60 KSi	30
Max
Min
Max
Hot Worked/Annealed
Min	120 KSi	60 KSi	30
Max
Min
Max

 

Specifications

Form	Standard
Metal Type	UNS N06625
Bar	ASTM B446 AMS 5666 BS3076
Wire	AMS 5837
Sheet	ASTM B443 AMS 5599 BS3072
Plate	ASTM B443 AMS 5599 BS3072
Pipe	ASTM B444 ASTM B704 AMS 5581 BS3074 GE B50TF133
Tube	ASTM B444 ASTM B704 AMS 5581 BS3074 GE B50TF133
Fitting	ASTM B366 Din 17754
Forging
Weld Wire
Weld Electrode
NA 21	All forms
Din	2.4856

If you need product information or price, please fill in your contact information in the form , we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Stock view

   

2. Processing and Technology for heating processing

Cutting processing      Quenching              Tempering                  Annealing

       

3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch  

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute 

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.

   

2.Inspection Machining

     

   Metal composition testing machine                      Computerised Materials Torsion Testing Machine                Metal bar composite rod bending tensile strength testing machine

       3. Material test certificate

     4. Packaging 

    In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：

According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996  Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

 GB/T16471-1996Design and make the size limit of transport package 

5. Logistic

       

               By SEA                                                     By Air                                                           By Express

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

           2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

                  .      

          3. Our customers 

                 Customer visits 

           4. Past Inquiry

                  .     

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

Customer Feedback:

           Comments

           HOT FAQ:

Q1. Where is your factory ?

A1: Our company’s processing center is located in Shanghai, China.Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.We can provide a wide range of personalized services according to the customers’ needs.

Q2. What are your company's main products ?

A2: We are professional one-stop meta supplier for Aluminium/ steel/ stainless steel/ copper etc.  

Q3. How do you control quality ?

A3: Mill Test Certification is supplied with shipment, Third Party Inspection is available.

Q4. What are the advantages of your company ?

A4: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.

Q5. How many coutries you already exported ?

A5: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt,Turkey, Jordan, India, etc. We are based in Shanghai, China, start from 2019,sell to Southeast Asia(50.00%),South America(10.00%),North America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),Northern Europe(5.00%),Domestic Market(15.00%),Mid East(10.00%). There are total about 11-50 people in our office.

Q6. Can you provide sample ?

A6: Small samples in store and can provide the samples for free.

Customized samples will take about 5-7days.

Q7Could we visit your factory?  

A7: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.  

Q8: Do you have quality control system?  

A8: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.  

Q9: Can you arrange the shipment for us?  

A9: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best  price with earliest vessel and professional service.

Q10: How long is the delivery time?  

A10: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.  

Q11: Can I get some samples?  

A11: We are glad to provide free samples to you, but we do not offer the freight.  

Q12: What is your after-sale service?  

A12: We provide after-sale service and offer 100% guarantee on our products.  

Q13: What is your MOQ?  

A13: Depend on the request material, sometimes for customized one have MOQ.

Q14: why should you buy from us not from other suppliers?

Luoyue precision metals (Shanghai) Co., Ltd. is located in Shanghai, China. It is one of the most professional metal material suppliers in China, providing nearly 100 kinds of metal materials, from raw materials to CNC processing

Q15: what services can we provide?

Accepted Delivery Terms: FOB, CFR, CIF, EXW, CIP, DDP, Express Delivery

Accepted Payment Currency:USD,EUR,JPY,CAD,GBP,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A

Language Spoken:English,Chinese,Spanish

Supply Ability

500 Ton/Tons per Month

Packaging & Delivery

Airworthy package. Waterproof cloth, wooden case, craft paper and steel belt packing.

Port: shanghai

Exhibition

Production Workshop

Package & Shipping

Contact us