Titanium Grade 6 – Titanium 5Al-2.5Sn

Titanium Grade 6 alloy offers good weldability, stability and strength at elevated temperatures.

Applications

Aerospace

Standards

ASME SB-381, AMS 4966, MIL-T-9046, MIL-T-9047, ASME SB-348, AMS 4976, AMS 4956, ASME SB-265, AMS 4910, AMS 4926

Forms Available

Bar, Forgings Plate, Sheet, Wire

Composition:

Ti/5Al/2.5Sn/.5Fe

Property	Minimum Value (S.I.)	Maximum Value (S.I.)	Units (S.I.)	Minimum Value (Imp.)	Maximum Value (Imp.)	Units (Imp.)
Atomic Volume (average)	0.01	0.011	m3/kmol	610.237	671.261	in3/kmol
Density	4.462	4.507	Mg/m3	278.554	281.363	lb/ft3
Energy Content	750	1250	MJ/kg	81254	135423	kcal/lb
Bulk Modulus	99	104.8	GPa	14.3587	15.1999	106 psi
Compressive Strength	600	896	MPa	87.0226	129.954	ksi
Ductility	0.06	0.1		0.06	0.1	NULL
Elastic Limit	758	862	MPa	109.939	125.023	ksi
Endurance Limit	410	450	MPa	59.4654	65.2669	ksi
Fracture Toughness	93	100	MPa.m1/2	84.6343	91.0047	ksi.in1/2
Hardness	3440	3520	MPa	498.93	510.533	ksi
Loss Coefficient	0.001	0.002		0.001	0.002	NULL
Modulus of Rupture	758	862	MPa	109.939	125.023	ksi
Poisson's Ratio	0.32	0.3331		0.32	0.3331	NULL
Shear Modulus	43	45.21	GPa	6.23662	6.55715	106 psi
Tensile Strength	793	945	MPa	115.015	137.061	ksi
Young's Modulus	107	112.5	GPa	15.519	16.3167	106 psi
Glass Temperature			K			°F
Latent Heat of Fusion	360	370	kJ/kg	154.771	159.071	BTU/lb
Maximum Service Temperature	805	866	K	989.33	1099.13	°F
Melting Point	1863	1880	K	2893.73	2924.33	°F
Minimum Service Temperature	0		K	-459.67		°F
Specific Heat	557	579.7	J/kg.K	0.431039	0.448606	BTU/lb.F
Thermal Conductivity	8	8.667	W/m.K	14.9763	16.2249	BTU.ft/h.ft2.F
Thermal Expansion	9.27	9.745	10-6/K	16.686	17.541	10-6/°F
Breakdown Potential			MV/m			V/mil
Dielectric Constant						NULL
Resistivity	160	170	10-8 ohm.m	160	170	10-8 ohm.m

Environmental Properties
	Resistance Factors 1=Poor 5=Excellent
Flammability	5
Fresh Water	5
Organic Solvents	5
Oxidation at 500C	4
Sea Water	5
Strong Acid	4
Strong Alkalis	4
UV	5
Wear	3
Weak Acid	5
Weak Alkalis	5

Titanium Alloy Grade 6 / Ti-5Al-2.5Sn

Technical Data Sheet

Titanium Ti5Al2.5Sn (Grade 6) is a high strength alloy which is most commonly used in airframe and jet engine applications. Titanium Ti5Al2.5Sn (Grade 6) has good weldability, stability and strength at elevated temperatures.

Chemical Composition Limits
Weight %	Ti	C	Fe	N	Al	O	Sn	H	Other
Titanium Ti5Al2.5Sn	bal	0.10	0.05	0.05	4.0/6.0	0.20	2.0-3.0	0.020	0.4 total max

Typical Mechanical Properties

Material	Tensile Strength min		Yield Strength				Elongation (%)
	ksi	Mpa	Min		Max
			ksi	Mpa	Ksi	Mpa
Titanium Ti-5Al-2.5Sn Annealed Sheet	120	830	115	795	-	-	10

Availability
Titanium Ti5Al2.5Sn is available in: Bar, Billet, Castings, Extrusion, Plate, Sheet, Wire. For all stock and size availability contact Sales.

Specifications
AMS 4926 Bars, Wire and Rings
AMS 4966 Forgings
ASTM B367 Gr6
UNS R54520
AMS 4909 Sheet, Strip, Plate (EL1 grade)
AMS 4910 Sheet, Strip, Plate
AMS 4924 Bars, Forgings, Ring (EL1 grade)
AMS 4926 Bar, Wire, Ring (Annealed - 110 ksi)
AMS 4966 Forgings
AMS 6900 Bars
AMS-T- 9046 A-1 Sheet, Strip, Plate
AMS-T- 9047 5Al-2.5Sn Bar
AMS-T-9046 A-2 (EL1) Sheet, Strip, Plate
MIL-T-9046J A-1 Sheet, Strip, Plate
MIL-T-9046H Type II Comp A Sheet, Strip, Plate
MIL-T-9046H Type II Comp B Sheet, Strip, Plate
MIL-T-9047G Bar
DTD 5083
TA14 (w/drawn)
TA15 (w/drawn)
TA16 (w/drawn)
TA17 (w/drawn)

                             Grade 6 Titanium Machining                                          Titanium Bar Stock

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Stock view

   

2. Processing and Technology for heating processing

Cutting processing      Quenching              Tempering                  Annealing

       

3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch  

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute 

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.

   

2.Inspection Machining

     

   Metal composition testing machine                      Computerised Materials Torsion Testing Machine                Metal bar composite rod bending tensile strength testing machine

       3. Material test certificate

     4. Packaging 

    In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：

According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996  Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

 GB/T16471-1996Design and make the size limit of transport package 

5. Logistic

       

               By SEA                                                     By Air                                                           By Express

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

           2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

                  .      

          3. Our customers 

                 Customer visits 

           4. Past Inquiry

                  .     

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

Customer Feedback:

           Comments

           HOT FAQ:

Q1. Where is your factory ?

A1: Our company’s processing center is located in Shanghai, China.Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.We can provide a wide range of personalized services according to the customers’ needs.

Q2. What are your company's main products ?

A2: We are professional one-stop meta supplier for Aluminium/ steel/ stainless steel/ copper etc.  

Q3. How do you control quality ?

A3: Mill Test Certification is supplied with shipment, Third Party Inspection is available.

Q4. What are the advantages of your company ?

A4: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.

Q5. How many coutries you already exported ?

A5: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt,Turkey, Jordan, India, etc. We are based in Shanghai, China, start from 2019,sell to Southeast Asia(50.00%),South America(10.00%),North America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),Northern Europe(5.00%),Domestic Market(15.00%),Mid East(10.00%). There are total about 11-50 people in our office.

Q6. Can you provide sample ?

A6: Small samples in store and can provide the samples for free.

Customized samples will take about 5-7days.

Q7Could we visit your factory?  

A7: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.  

Q8: Do you have quality control system?  

A8: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.  

Q9: Can you arrange the shipment for us?  

A9: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best  price with earliest vessel and professional service.

Q10: How long is the delivery time?  

A10: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.  

Q11: Can I get some samples?  

A11: We are glad to provide free samples to you, but we do not offer the freight.  

Q12: What is your after-sale service?  

A12: We provide after-sale service and offer 100% guarantee on our products.  

Q13: What is your MOQ?  

A13: Depend on the request material, sometimes for customized one have MOQ.

Q14: why should you buy from us not from other suppliers?

Luoyue precision metals (Shanghai) Co., Ltd. is located in Shanghai, China. It is one of the most professional metal material suppliers in China, providing nearly 100 kinds of metal materials, from raw materials to CNC processing

Q15: what services can we provide?

Accepted Delivery Terms: FOB, CFR, CIF, EXW, CIP, DDP, Express Delivery

Accepted Payment Currency:USD,EUR,JPY,CAD,GBP,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A

Language Spoken:English,Chinese,Spanish

Supply Ability

500 Ton/Tons per Month

Packaging & Delivery

Airworthy package. Waterproof cloth, wooden case, craft paper and steel belt packing.

Port: shanghai

Exhibition

Production Workshop

Package & Shipping

Contact us