38Si7 / 1.5023 - European Steel and Alloy Grades-Luoyue Precision Metal

General Information

SB40SI7 is a spring steel used in quenched and tempered condition.EN 1.5023 steel is an alloy steel formulated for primary forming into wrought products. 1.5023 is the EN numeric designation for this material. 38Si7 is the EN chemical designation.

It has a very low density among EN wrought alloy steels. In addition, it has a moderately low embodied energy and a very low base cost.

Similar designations

1.5023

Chemical composition

Variant Cast Weldability C % Si % Mn % P % S % Cu %

SB40Si7 CC CEV 0.52max Min 0.38 1.50 0.50 - - -

Pcm 0.5max Max 0.42 1.80 0.80 0.025 0.025 0.35

38Si7 EN10089 Std CEV 0.51max Min 0.35 1.50 0.50 - - -

Pcm 0.48max Max 0.42 1.80 0.80 0.025 0.025 -

Mechanical Properties

Variant Condition Format Dimension [mm] Hardness

Rp0.2 * Reh, ** Rel

SB40Si7 +AR Flat bar 6 < 20 240 HB typical

Transformation temperatures

Temperature °C

MS 341

AC1 764

AC3 841

Variant	Cast	Weldability		C %	Si %	Mn %	P %	S %	Cu %
SB40Si7	CC	CEV 0.52max	Min	0.38	1.50	0.50	-	-	-
Pcm 0.5max	Max	0.42	1.80	0.80	0.025	0.025	0.35
38Si7 EN10089	Std	CEV 0.51max	Min	0.35	1.50	0.50	-	-	-
Pcm 0.48max	Max	0.42	1.80	0.80	0.025	0.025	-

Variant	Condition	Format	Dimension [mm]	Hardness
Rp0.2 * Reh, ** Rel
SB40Si7	+AR	Flat bar	6 < 20	240 HB typical

	Temperature °C
MS	341
AC1	764
AC3	841

HOT WORKING & HEAT TREATMENT
Hot working temperature /℃: 1100~850
Thermal forming temperature /℃: 900~820
Heat treatment temperature/℃|annealing /℃: 640～680
Heat treatment temperature/℃|normalizing /℃: 830~860
Heat treatment temperature/℃|quenching /℃: 830～860 Water
Heat treatment temperature/℃|tempering /℃: 430～500
Hardness after annealing ≤HBW: 217

MAIN FEATURES & PERFORMANCE REQUIREMENTS
Spring steel is specialized in producing the spring and elastic components due to its elasticity under the condition of quenching and tempering. The elasticity of steel depends on its capacity of elastic deformation.
This allows objects made of spring steel to return to their original shape despite significant bending or twisting occurs.
Spring steel should possess excellent combination property, such as mechanical property (limit of elasticity, ultimate strength, yield ratio), relaxation resistant, fatigue property, hardenability, physical and chemical property (heat resistance,low temperature resistant, antioxidation, corrosion resistance). To meet the above performance requirement, Spring steel has fine metallurgical quality ( high purity, homogeneity), excellent surface quality ( specially on surface defect and decarburization), precise external form and dimensions.

HEAT TREATMENT
Spring Steel requires higher strength and fatigue limit, usage in the condition of quenching + mesothermal tempering, then it can get higher elastic limit. Process engineering of heat treatment is very important to inherent quality of spring steel.

MANUFACTURING TECHNIQUE
General spring steels are produced in electric furnace, open hearth furnace, oxygen converter,and high quality spring steel of higher quality or special performance can be made in electro slag furnace or vacuum furnace.

PROCESSING PROPERTY
Spring Steel is commonly used in the condition of impact, vibration, or long-term stress. which makes the spring steel require higher tensile strength, limit of elasticity, fatigue strength. also requirement of definite hardenability, good surface quality, not easy decarburization.

PROFILE AND DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.

If you need product information or price, please fill in your contact information in the message form, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Stock view



2. Processing and Technology for heating processing

Cutting processing   Quenching   Tempering Annealing



3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.



2.Inspection Machining

   Metal composition testing machine   Computerised Materials Torsion Testing Machine   Metal bar composite rod bending tensile strength testing machine

3. Material test certificate

4. Packaging

  In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：



According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996  Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

GB/T16471-1996Design and make the size limit of transport package

5. Logistic



By SEA By Air By Express

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

.

3. Our customers

Customer visits

4. Past Inquiry

.

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

Customer Feedback:

Comments

HOT FAQ:

Q1. Where is your factory ?

A1: Our company’s processing center is located in Shanghai, China.Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.We can provide a wide range of personalized services according to the customers’ needs.

Q2. What are your company's main products ?

A2: We are professional one-stop meta supplier for Aluminium/ steel/ stainless steel/ copper etc.

Q3. How do you control quality ?

A3: Mill Test Certification is supplied with shipment, Third Party Inspection is available.

Q4. What are the advantages of your company ?

A4: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.

Q5. How many coutries you already exported ?

A5: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt,Turkey, Jordan, India, etc. We are based in Shanghai, China, start from 2019,sell to Southeast Asia(50.00%),South America(10.00%),North America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),Northern Europe(5.00%),Domestic Market(15.00%),Mid East(10.00%). There are total about 11-50 people in our office.

Q6. Can you provide sample ?

A6: Small samples in store and can provide the samples for free.

Customized samples will take about 5-7days.

Q7Could we visit your factory?

A7: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.

Q8: Do you have quality control system?

A8: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.

Q9: Can you arrange the shipment for us?

A9: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best price with earliest vessel and professional service.

Q10: How long is the delivery time?

A10: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.

Q11: Can I get some samples?

A11: We are glad to provide free samples to you, but we do not offer the freight.

Q12: What is your after-sale service?

A12: We provide after-sale service and offer 100% guarantee on our products.

Q13: What is your MOQ?

A13: Depend on the request material, sometimes for customized one have MOQ.

Q14: why should you buy from us not from other suppliers?

Luoyue precision metals (Shanghai) Co., Ltd. is located in Shanghai, China. It is one of the most professional metal material suppliers in China, providing nearly 100 kinds of metal materials, from raw materials to CNC processing

Q15: what services can we provide?

Accepted Delivery Terms: FOB, CFR, CIF, EXW, CIP, DDP, Express Delivery

Accepted Payment Currency:USD,EUR,JPY,CAD,GBP,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A

Language Spoken:English,Chinese,Spanish

Supply Ability

500 Ton/Tons per Month

Packaging & Delivery

Airworthy package. Waterproof cloth, wooden case, craft paper and steel belt packing.

Port: shanghai

Exhibition

Production Workshop

Package & Shipping

Contact us