AISI 1015 Carbon Steel (UNS G10150)-Luoyue Precision Metal

1015 carbon steel:

Characteristics and scope of application: used for manufacturing parts and carburized parts with little force and high toughness requirements, fasteners and forging dies and low load parts without heat treatment.

Corresponding country brand:
China GB, YB: 15 #
JIS: S15C,S15CK
German DIN - Nr (W) : C15 (1.0401), CK15 (1.1141), Cm15 (1.1140)
The British BS: 040 a17, 050 a17, 060 a17

AISI1015 is American standard carbon structural steel, implemented standard: ASTM A29/A29M-04

The chemical composition of AISI1015 is shown below

Chemical composition:
S: sulfur 0.040 or less
P P: 0.050 or less

Physical Properties

The following table shows the physical properties of AISI 1015 carbon steel.

Properties Metric Imperial

Density 7.87 g/cc 0.284 lb/in³

Mechanical Properties

The mechanical properties of the cold drawn AISI 1015 carbon steel are displayed in the following table.

Properties Metric Imperial

Tensile strength 385 MPa 55800 psi

Yield strength 325 MPa 47100 psi

Bulk modulus (typical for steel) 140 GPa 20300 ksi

Shear modulus (typical for steel) 80.0 GPa 11600 ksi

Elastic modulus 190-210 GPa 27557-30458 ksi

Poisson's ratio 0.27-0.30 0.27-0.30

Elongation at break (In 50 mm) 18.00% 18.00%

Reduction of area 40.00% 40.00%

Hardness, Brinell 111 111

Hardness, Knoop (converted from Brinell hardness) 129 129

Hardness, Rockwell B (converted from Brinell hardness) 64 64

Hardness, Vickers (converted from Brinell hardness) 115 115

Machinability (based on AISI 1212 steel as 100 machinability. The machinability of Group I bar, rod, and wire products can be improved by cold drawing.) 60 60

Thermal Properties

The thermal properties of AISI 1015 carbon steel are given in the following table.

Properties Metric Imperial

Thermal expansion co-efficient (@0.000-100°C/32.0-212°F) 11.9 µm/m°C 6.61 µin/in°F

Thermal conductivity (estimated based on similar materials) 51.9 W/mK 360 BTU in/hr.ft².°F

Other Designations

Equivalent materials to AISI 1015 carbon steel are listed in the following table.

AMS 5060 ASTM A29 ASTM A510 ASTM A512 (1015, MT 1015) ASTM A830

ASTM A519 (1015, MT 1015) ASTM A545 ASTM A549 (1015) ASTM A575 (M1015) ASTM A576

ASTM A635 ASTM A659 (1015) ASTM A787 (MT 1015) ASTM A794 ASTM A513 (MT 1015)

SAE J1397 SAE J403 SAE J412 SAE J414 ASTM A108

FED QQ-S-698 (C1015) MIL SPEC MJL-S-16974

Properties	Metric	Imperial
Density	7.87 g/cc	0.284 lb/in³

Properties	Metric	Imperial
Tensile strength	385 MPa	55800 psi
Yield strength	325 MPa	47100 psi
Bulk modulus (typical for steel)	140 GPa	20300 ksi
Shear modulus (typical for steel)	80.0 GPa	11600 ksi
Elastic modulus	190-210 GPa	27557-30458 ksi
Poisson's ratio	0.27-0.30	0.27-0.30
Elongation at break (In 50 mm)	18.00%	18.00%
Reduction of area	40.00%	40.00%
Hardness, Brinell	111	111
Hardness, Knoop (converted from Brinell hardness)	129	129
Hardness, Rockwell B (converted from Brinell hardness)	64	64
Hardness, Vickers (converted from Brinell hardness)	115	115
Machinability (based on AISI 1212 steel as 100 machinability. The machinability of Group I bar, rod, and wire products can be improved by cold drawing.)	60	60

Properties	Metric	Imperial
Thermal expansion co-efficient (@0.000-100°C/32.0-212°F)	11.9 µm/m°C	6.61 µin/in°F
Thermal conductivity (estimated based on similar materials)	51.9 W/mK	360 BTU in/hr.ft².°F

Application: used for manufacturing carburized parts, fastening parts and low load parts without heat treatment, such as screws, bolts, flanges, etc.

If you need product information or price, please fill in your contact information in the form, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Stock view



2. Processing and Technology for heating processing

Cutting processing   Quenching   Tempering Annealing



3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.



2.Inspection Machining

   Metal composition testing machine   Computerised Materials Torsion Testing Machine   Metal bar composite rod bending tensile strength testing machine

3. Material test certificate

4. Packaging

  In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：



According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996  Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

GB/T16471-1996Design and make the size limit of transport package

5. Logistic



By SEA By Air By Express

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

.

3. Our customers

Customer visits

4. Past Inquiry

.

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

Customer Feedback:

Comments

HOT FAQ:

Q1. Where is your factory ?

A1: Our company’s processing center is located in Shanghai, China.Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.We can provide a wide range of personalized services according to the customers’ needs.

Q2. What are your company's main products ?

A2: We are professional one-stop meta supplier for Aluminium/ steel/ stainless steel/ copper etc.

Q3. How do you control quality ?

A3: Mill Test Certification is supplied with shipment, Third Party Inspection is available.

Q4. What are the advantages of your company ?

A4: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.

Q5. How many coutries you already exported ?

A5: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt,Turkey, Jordan, India, etc. We are based in Shanghai, China, start from 2019,sell to Southeast Asia(50.00%),South America(10.00%),North America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),Northern Europe(5.00%),Domestic Market(15.00%),Mid East(10.00%). There are total about 11-50 people in our office.

Q6. Can you provide sample ?

A6: Small samples in store and can provide the samples for free.

Customized samples will take about 5-7days.

Q7Could we visit your factory?

A7: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.

Q8: Do you have quality control system?

A8: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.

Q9: Can you arrange the shipment for us?

A9: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best price with earliest vessel and professional service.

Q10: How long is the delivery time?

A10: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.

Q11: Can I get some samples?

A11: We are glad to provide free samples to you, but we do not offer the freight.

Q12: What is your after-sale service?

A12: We provide after-sale service and offer 100% guarantee on our products.

Q13: What is your MOQ?

A13: Depend on the request material, sometimes for customized one have MOQ.

Q14: why should you buy from us not from other suppliers?

Luoyue precision metals (Shanghai) Co., Ltd. is located in Shanghai, China. It is one of the most professional metal material suppliers in China, providing nearly 100 kinds of metal materials, from raw materials to CNC processing

Q15: what services can we provide?

Accepted Delivery Terms: FOB, CFR, CIF, EXW, CIP, DDP, Express Delivery

Accepted Payment Currency:USD,EUR,JPY,CAD,GBP,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A

Language Spoken:English,Chinese,Spanish

Supply Ability

500 Ton/Tons per Month

Packaging & Delivery

Airworthy package. Waterproof cloth, wooden case, craft paper and steel belt packing.

Port: shanghai

Exhibition

Production Workshop

Package & Shipping

Contact us

AMS 5060	ASTM A29	ASTM A510	ASTM A512 (1015, MT 1015)	ASTM A830
ASTM A519 (1015, MT 1015)	ASTM A545	ASTM A549 (1015)	ASTM A575 (M1015)	ASTM A576
ASTM A635	ASTM A659 (1015)	ASTM A787 (MT 1015)	ASTM A794	ASTM A513 (MT 1015)
SAE J1397	SAE J403	SAE J412	SAE J414	ASTM A108
FED QQ-S-698 (C1015)	MIL SPEC MJL-S-16974