SAE 1035 Carbon Steel Round Bar stockists and manufacturer in India, buy any quantity & size at factory rate
Being one of the noted manufacturer, stockists and suppliers, weoffer SAE 1035 Carbon Steel Round Bar. Available at economical rates, the offered SAE 1035 Carbon Steel Round Bar are widely used in metallurgical, mechanical, electrical construction field, ships, military uses and automobile rear of products.We are a prominent name in manufacturing and supplying a wide range of SAE 1035 Carbon Steel Round Bar for our reliable clients. The offered SAE 1035 Carbon Steel Round Bar are precisely manufactured by our knowledgeable professionals using latest technology and the superior quality of carbon steel available in the market. The provided bars go through various quality tests on each step of manufacturing process as per the set industry norms. Moreover, these SAE 1035 Carbon Steel Round Bar are provided by us in various sizes as per the client’s needs.
We are the leading manufacturer and supplier of SAE 1035 Carbon Steel Round Bar that are manufactured using high quality raw material and advanced technology. Our offered SAE 1035 Carbon Steel Round Bar product range includes Mild Steel Round Bars, Alloy Steel Round Bars, Bearing Steel Round Bars, Free Cutting Steel Round Bars and Carbon Steel Round Bars. These products are tested on various parameters in order to ensure flawlessness of the product. Our valuable clients can avail these SAE 1035 Carbon Steel Round Bar products at market leading prices. We are an ISO 9001:2008 registered company, and have been recognized as one of the world’s leading stockists and manufacturer of quality metals for over two decades and are committed to quick responses, unsurpassed quality, competitive pricing, reliable deliveries and an exhaustive inventory.
Buy SAE 1035 Carbon Steel Round Bar Directly From The Manufacturer In China
The ASTM specified 1035 Round Bar is a low carbon alloyed steel grade. This SAE 1035 Carbon Steel Round Bar is to conform to the chemistry specifications of the ASTM 1035 by the performance of a heat analysis.
Keep Bulk Stock Of 1035 Cold Drawn Steel Bar, 1035 Carbon Steel Rods At Our Stockyard
The astm 1035 carbon steel flat bar is to be rolled from properly identified heats of mould cast or from strand cast steel. The identification of the Carbon Steel Grade 1035 bar is to be done with any one of the following processes i.e. a basic oxygen process, electric furnace process, or an open hearth process. Per this specification, steel specimens such as C35 Round bar are required to undergo certain tests. For instance, a deformation test, tensile test, as well as a bend test will be conducted on the ASTM specified c1035 carbon steel round bar.
Furthermore, these steel specimens, in this case, astm 1035 carbon steel round bar have to conform to required values of yield strength, tensile strength, stress, in addition to the elongation values. Lastly, the final product i.e. AISI 1035 steel round bars have to be marked by a tag. Since the 1035 Cold Drawn Steel Bar is a water resisting carbon steel grade, the alloy has the ability to exhibit properties like good wear resistance and hardenability. These properties have been attributed to the increase of small quantity of chromium.
APPLICATIONS
This grade of steel is used for forged parts where the strength and toughness of the material are appropriate. C1035 may be used for the manufacture of links and couplings, gears, forged shafts and axles. It may also be used for the production, by open die forging, of such diverse parts as a 4,000 lb hub for a mining shovel.
FORGING
C1035 may be forged from 2200ºF (1205ºC) down to 1650ºF (900ºC.) The actual forging and finishing temperatures will depend on a number of factors, including overall reduction during forging and complexity of part being forged. Experience alone will determine near exact values for these two parameters.
Parts are air cooled after forging.
HEAT TREATMENT
ANNEALING
Full annealing of small C1035 forgings is carried out from 1550-1625ºF (840-890ºC) followed by furnace cooling at 50ºF (28ºC) per hour, to 1200ºF (650ºC) soaking and air cooling.
NORMALIZING
The normalizing temperature range for this grade is typically 1600-1650ºF (870-900ºC.)
Normalizing is followed by cooling in still air. When forgings are normalized before hardening and tempering or other heat treatment, the upper range of the normalizing temperature is used. When normalizing is the final treatment, the lower temperature range is used.
HARDENING
Hardening of this grade is carried out from an austenitizing temperature of 1525-1575ºF (830-860ºC) and oil or water quenching.
Flame and induction hardening may be carried out by heating quickly to the desired case depth and quenching in water or oil. This should be followed by a tempering treatment at 300-400ºF (150-200ºC) to reduce stresses in the case without affecting its hardness. A surface hardness of Rc 50 may be obtained by this treatment.
TEMPERING
Tempering after normal hardening and oil or water quenching is carried out at 750-1260 ºF (400-680ºC) to give the required mechanical properties as determined by practical experience.
MACHINABILITY
Machinability of C1035 is good providing the full annealing cycle described above is used, ensuring a coarse lamellar pearlite to coarse spheroidite microstructure.
If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.
NO.501 Dongshe Road, Dongjing Town, Songjiang District, Shanghai,China,201600
. 
Mobile/Whatsapp/Zalo/Lines/Skype
General Inquiry
company profile download