MATERIAL DATA SHEET - DIN 36Mn5
MATERIAL CATEGORY: hardened and tempered steel 
PRODUCT DESCRIPTION
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
The alloy is usually produced by EAF /VD /LF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - heat treatment / QT 
MATERIAL SPECIFICATIONS  
DIN EN 10083-3 (2006), DIN 17200 (1987) 

CHEMICAL COMPOSITION (WEIGHT %)
C (％):     0.32 ~ 0.40
Si (％):    ≤ 0.40
Mn (％):   1.20 ~ 1.50
P (％)≤:   0.035
S (％)≤:   0.035
Cr (％):    —
Mo (％):    —
Ni (％):    —

MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
Hot working temperature /℃: 1100～850
Heat treatment temperature /℃| annealing: 650～700
Heat treatment temperature /℃| Normalizing: 850～880
Heat treatment temperature /℃| Quenching: 820～850water, 830 ~ 860oil
Heat treatment temperature /℃| Tempering: 550～660
Hardness after annealing ≤HBS: 217
Steel dimension /mm: ≤16
|σb≥/MPa:  930 ~ 1080
|σs≥/MPa:  685
|δ5≥/(%):  9.0
|ψ≥/(%):   35.0
|AKV≥/J:  41
Steel dimension /mm:   17 - 40
|σb≥/MPa: 830 ~ 980
|σs≥/MPa: 590
|δ5≥/(%): 10.0
|ψ≥/(%):  40.0
|AKV≥/J:  41
Steel dimension /mm:   41 - 100
|σb≥/MPa:  740 ~ 880
|σs≥/MPa:   540
|δ5≥/(%):   12.0
|ψ≥/(%):     45.0
|AKV≥/J:  48

AVAILABLE SHAPES  
Black bar / Flat bar / Square bar / Steel strip / Sheet
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft

TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on. 
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to email or call our resident team of qualified production engineers. Email: cnc@lyapm.com
PRODUCT PROFILE  
Round bar / Wire rod (Diameter):  5.5mm to 800mm
Square bar / Flat bar: 10mm to 1000mm
Plate / Sheet steel / Steel strip: 0.5mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD30 - 1300 mm, with wall thickness ranging from 15 to 350 mm.

Mechanical Properties

• Quantity
• Value
• Unit

• Young's modulus
• Tensile strength
• Elongation
• Fatigue
• Yield strength

• 200000 - 200000
• 650 - 880
• 8 - 25
• 275 - 275
• 350 - 550

• MPa
• MPa
• %
• MPa
• MPa

Physical Properties

• Quantity
• Value
• Unit

• Thermal expansion
• Thermal conductivity
• Specific heat
• Melting temperature
• Density
• Resistivity

• 10 - 10
• 25 - 25
• 460 - 460
• 1450 - 1510
• 7700 - 7700
• 0.55 - 0.55

• e-6/K
• W/m.K
• J/kg.K
• °C
• kg/m³
• Ohm.mm²/m

Heat Treatment:

Annealing	Quenching	Tempering	Normalizing	Q & T
√	√	√	√	√

Can produce 36Mn5 specifications and size

• Steel grade
• Specification
• Processing range(mm)

• 36Mn5
• 36Mn5
• 36Mn5
• 36Mn5
• 36Mn5
• 36Mn5

• Round bar
• Square-shape steel/Flate bar
• Steel Plate/Sheet
• Forging
• Tubings
• Steel coils and strip

• Φ1 to Φ2000
• 10 to 1000
• 0.08 to 800(T)*10 to 1500(W)*Long
• Pipe/tube/slugs/donuts/cubes/other shapes
• OD: Φ4-410; WT: 1-35 mm
• THK:0.1mm Width:1500mm
• 
  

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Stock view

   

2. Processing and Technology for heating processing

Cutting processing      Quenching              Tempering                  Annealing

       

3. Quality testing

1.      Inspection Institution

Shanghai Fuda Testing Technology Group Co., LTD. Nanjing Branch  

Focus on analysis, testing, testing, r & D four service areas. Analysis fields include component analysis, formula analysis, failure analysis, structure analysis, methodology development and validation, raw material quality control/evaluation, consistency evaluation, feature analysis and other directions; The testing field involves physical and chemical properties testing, toxic and harmful substances testing, flame retardant performance testing, reliability testing and other directions; The testing field involves energy spectrum, electron microscope, spectrum, chromatography, mass spectrometry and other directions; The r&d field involves formula development, formula upgrading, formula customisation, cooperative research and development and other directions.

Beijing Zhongke Chemical Technology Research Institute 

It is a chemical technology research institution based on scientific research and testing. They adhere to paying equal attention to basic research and applied research, and combining applied research and technology transformation, developing into a comprehensive research institute characterised by "task-oriented disciplines". Approved by the relevant national departments, the company has become a third-party analysis and testing technology service unit, and has obtained CMA qualification certification. It has carried out research and development and design, analysis and testing, test and verification, generic processing, information and intellectual property services, providing public services for innovation of technology-based enterprises. Supported by the government innovation Fund, the institute has been awarded as a national high-tech enterprise.

   

2.Inspection Machining

     

   Metal composition testing machine                      Computerised Materials Torsion Testing Machine                Metal bar composite rod bending tensile strength testing machine

       3. Material test certificate

     4. Packaging 

    In the steel export activities, we also need to pack the steel to prevent the steel from being scattered in the transportation process. In the hoisting process, it is necessary to lift the steel. So steel is very necessary in the export process. Below is the picture of packaging：

According to the requirements of the state of steel materials, the use of binding, bare, frame, pallet.

Packing standard: according to the following national standard requirements (the parts beyond the requirements will be specified separately)

GB／T191 packaging-pictorial marking for handling of goods

GB／T4857 (all parts) basic test for transport packages

GB／T4879 rustproof packaging

GB／T5048 damp-proof packing

GB／T7350water-proof packing

GB／T8166 Package cushioning design

GB/T4892-1996  Hard straight square transport packaging size series

GB/T13201-91 Cylinder transport package size series

 GB/T16471-1996Design and make the size limit of transport package 

5. Logistic

       

               By SEA                                                     By Air                                                           By Express

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

1. Company profile

Luoyue Precision Metal established in 2018, is a leading Stockists and global distributor for Metal Raw Materials like Steel/Aluminum/ Stainless steel/Copper/ Nickel Rods, Bars, Plates, Sheets,Pipes, fittings, fasteners, Inconel alloys, Wire and Wire-Mesh to customers from aerospace, automotive, electronics, precision manufacturing, ordnance, marine, shipbuilding, oil & gas, power plant and construction.

The company has a high-precision, high-efficiency modern processing site, CNC machine tools and complete testing and inspection technology, and introduces international advanced technologies.

           2. Certificates. (Business certificate/ISO9001/Trading certificate/SGS/FormE)

                  .      

          3. Our customers 

                 Customer visits 

           4. Past Inquiry

                  .     

If you need product information or price, please fill in your contact information in the form below, we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.

Customer Feedback:

           Comments

           HOT FAQ:

Q1. Where is your factory ?

A1: Our company’s processing center is located in Shanghai, China.Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.We can provide a wide range of personalized services according to the customers’ needs.

Q2. What are your company's main products ?

A2: We are professional one-stop meta supplier for Aluminium/ steel/ stainless steel/ copper etc.  

Q3. How do you control quality ?

A3: Mill Test Certification is supplied with shipment, Third Party Inspection is available.

Q4. What are the advantages of your company ?

A4: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.

Q5. How many coutries you already exported ?

A5: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt,Turkey, Jordan, India, etc. We are based in Shanghai, China, start from 2019,sell to Southeast Asia(50.00%),South America(10.00%),North America(5.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),Northern Europe(5.00%),Domestic Market(15.00%),Mid East(10.00%). There are total about 11-50 people in our office.

Q6. Can you provide sample ?

A6: Small samples in store and can provide the samples for free.

Customized samples will take about 5-7days.

Q7Could we visit your factory?  

A7: Sure, we welcome you to visit the factory , check our production lines and know more about our strength and quality.  

Q8: Do you have quality control system?  

A8: Yes, we have ISO, BV, SGS certifications and our own quality control laboratory.  

Q9: Can you arrange the shipment for us?  

A9: Yes, we have designated sea freight and railway freight forwarders with decades of experiences and we get the best  price with earliest vessel and professional service.

Q10: How long is the delivery time?  

A10: Generally it is 7 days if we have the exact goods in our stock. If not, it will take around 15-20 days to get goods ready for delivery.  

Q11: Can I get some samples?  

A11: We are glad to provide free samples to you, but we do not offer the freight.  

Q12: What is your after-sale service?  

A12: We provide after-sale service and offer 100% guarantee on our products.  

Q13: What is your MOQ?  

A13: Depend on the request material, sometimes for customized one have MOQ.

Q14: why should you buy from us not from other suppliers?

Luoyue precision metals (Shanghai) Co., Ltd. is located in Shanghai, China. It is one of the most professional metal material suppliers in China, providing nearly 100 kinds of metal materials, from raw materials to CNC processing

Q15: what services can we provide?

Accepted Delivery Terms: FOB, CFR, CIF, EXW, CIP, DDP, Express Delivery

Accepted Payment Currency:USD,EUR,JPY,CAD,GBP,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A

Language Spoken:English,Chinese,Spanish

Supply Ability

500 Ton/Tons per Month

Packaging & Delivery

Airworthy package. Waterproof cloth, wooden case, craft paper and steel belt packing.

Port: shanghai

Exhibition

Production Workshop

Package & Shipping

Contact us