Home --> PRODUCTS --> High Strength Steel --> Marine steel
Name:AH36
Download PDF Copy
Brief introduction: AH36
AH36, DH36, EH36 Steel - Common Use High Strength Steel in Offshore & Marine
Product Description
Service
Why choose us?
Buyers review


 Shipbuilding steel plate refers to the carbon and alloy steel plate used in offshore and marine contructions, common grades are A, B, D, E, AH32/36/40, DH32/36/40, and EH32/36/40 which ranged from different strength. The plates usually used to manufacture ship hulls, bulkheads, upper decks and hatch covers for tankers, bulk carriers, container ships and LNG carriers. 


Materials

Shipbuilding steel material in carbon and alloy steel, compatible with high strength, low temperature and high heat input soldering.

Shipbuiding Standards from Different Countries

Shipbuilding steel plates are produced under the approval of production methods of classification societies in different countries refers to offshore and marine steels.

  • ABS (American Bureau of Shipping)
  • BV (Bureau Veritas)
  • CCS (China Classification Society)
  • DNV (Det Norske Veritas)
  • GL (Germanischer Lloyd)
  • HR (Hellenic Register of Shipping)
  • KR (Korean Register of Shipping)
  • LR (Lloyd's Register of Shipping)
  • NK (Nippon Kaiji Kyokai)
  • RINA (Registro Italiano Navale)
  • RS (India Register of Shipping) 

Grades: A, B, D, E, AH32/36/40, DH32/36/40, EH32/36/40

According to its yield strength, shipbuilding plate of can be divided into below grades:

  • Grade A steel is the impact force subjected to normal temperature (20 ° C).
  • Grade B steel impact force at 0 °C.
  • Grade D steel impact force at -20 °C.
  • Grade E steel impact force at -40 °C.
  • High-strength shipbuilding steel plate can be further divided into: AH32, DH32, EH32; AH36, DH36, EH36 and AH40, DH40, EH40.

1. The general grades A, B, D, and E are distinguished according to the impact temperature of the steel. The impact values of all grades of steel are the same.

2. High-intensity hull structure steel preheating requirements: For all AH, DH, EH plate thickness greater than 30mm angle, butt joints, shall be preheating to 120 ~ 150 °C before welding.

3. For thickness of the plate ≤ 30mm, the ambient temperature is below 5 ° C, preheated to 75 ° C; Ambient temperature below 0 ° C, preheated to 75 ~ 100 ° C.

Dimensions Range

Thickness Range: 5 mm -150 mm
Width Range: 1500 mm - 3900 mm
Length Range: 6 m, 12 m, coils

Surface Treatment

With anti-rust painting.

Chemical and Mechanical Requirements

Elements

C

Mn

Al

Si

P

S

AH32

≤0.18

0.7~1.60

≥0.015

0.10~0.50

≤0.04

≤0.04

DH32

≤0.18

0.90~1.60

≥0.015

0.10~0.50

≤0.04

≤0.04

EH32

≤0.18

0.90~1.60

≥0.015

0.10~0.50

≤0.04

≤0.04

AH36

≤0.18

0.7~1.60

≥0.015

0.10~0.50

≤0.04

≤0.04

DH36

≤0.18

0.90~1.60

≥0.015

0.10~0.50

≤0.04

≤0.04

EH36

≤0.18

0.90~1.60

≥0.015

0.10~0.50

≤0.04

≤0.04

C (carbon) is an indispensable strengthening element in steel, but the increase in C content reduces the low-temperature impact toughness of steel and deteriorates the weldability of steel. Therefore, it is necessary to control the C content in the steel.

According to the experience of producing aluminsum-containing steel, in order to ensure the aluminum content in the steel and the fluidity of the molten steel, the method of pre-deoxidation is strictly to control the carbon content of the end point and the alloying of the large-pack alloy to control the oxidation of the molten steel. The way of adding aluminum.

In order to ensure good low temperature impact toughness of the steel grade, the rolling of the 355MPa class ship plate adopts a strict type II controlled rolling process.

Mechanical Properties



Steel Grade



Thickness/mm



Yield point/ MPa


Tensile strength/ MPa



Elongation/ %

V-type impact test

Temperature/ 

Average impact absorption

workAkv/J

Vertical

Horizontal

A

≤50

≥235

400~490

≥22

-

-

-

B

≤50

≥235

400~490

≥22

0

≥27

≥20

D

≤50

≥235

400~490

≥22

-10

≥27

≥20

E

≤50

≥235

400~490

≥22

-40

≥27

≥20

AH32

≤50

≥315

440~590

≥22

0

≥31

≥22

DH32

≤50

≥315

440~590

≥22

-20

≥31

≥22

EH32

≤50

≥315

440~590

≥22

-40

≥31

≥22

AH36

≤50

≥355

490~620

≥22

0

≥34

≥24

DH36

≤50

≥355

490~620

≥22

-20

≥34

≥24

EH36

≤50

≥355

490~620

≥22

-40

≥34

≥24

Processing for Different Grades

Grade A and B

The general strength of grade A and B shipbuilding steel plates can meet the requirements of process and mechanical properties through ordinary rolling, so the production process is relatively simple.

Grade D, E (DH32, DH36, EH 32, EH 36)

Grade D and E series (inlcuding AH32/36, DH32, DH36, EH32, EH36) shipbuilding steel plates require good low temperature toughness and good welding performance. The production high-strength shipbuilding steel plate needs to be normalized by means of controlled rolling and controlled cooling or heat treatment processes with more complete equipment. At the same time, the internal steel purity of the supplied billets is required to be high, especially the content of S, P, N, 0 and H in the steel should be strictly controlled.

Alloy Elements Added to Improve Toughness

In order to ensure the performance of high-strength ship plates, micro-alloying technology is adopted. By adding Nb, V, Ti and other alloying elements to the steel, combined with the controlled rolling process, the grain is refined and the toughness is improved.

Direction of Development for Shipbuilding Plate

High strength, high specification, with the ship's large-scale and safety, and changes in coating specifications, the demand for ordinary A-class panels is gradually reduced, and the demand for high-strength panels is increasing, which is concentrated in large ships of 5m wide. Plate, 200-300mm thickness special thick ship board.

If you need product information or price, please fill in your contact information in the form , we will usually contact you within 12 hours. You could also email me info@lyapm.com to get prompt reply.




Special recommendation
5052 Aluminium
SUP9 Spring Steel | 55CrMnA | 55Cr3 | 1.7176 | 527A60
7075-t6 aluminum pipe
5754 aluminium alloy
6061 T6/T651 ALUMINIUM PLATE
CuZn36Pb3 (CW603N) lead brass
CONTACT US
NO.501 Dongshe Road, Dongjing Town, Songjiang District, Shanghai,China,201600
Mobile/Whatsapp/Zalo/Lines/Skype:+8616628500844
Copyright@2018-2030 LUOYUE PRECISION METAL (SHANGHAI) CO., LTD